Properties of Caustic Acid Tank

/Properties of Caustic Acid Tank
Properties of Caustic Acid Tank2019-07-05T13:54:36+03:00

Caustic acid tank are tanks for sodium hydroxide storage. Polyethylene and polyester acid tanks will be suitable for storage of this acid. However, polyethylene caustic acid tanks will not be sufficient for stocking with a stock temperature above 55 degrees. For this, polyester acid tanks should be used. Below you can see the resistance values of polyester acid tanks for caustic acid.

Caustic Acid Tank

Polyester Caustic Acid Tank

Resistance Table

Resistance Concentration (%) Tempature (^C)
Caustic Acid %5 70^C
%25 65^C
%50 90^C
Click to review for resistance of all acid type.

Product Images

  • According to your request, acid tank production can be provided in the most appropriate size for your project.
  • Vinylester acid tank’ warranty period is 5 years.

Polythene Caustic Acid Tank

Polyethylene acid tanks, whose thickness is increased according to the concentration ratio of caustic acid, sizes can not be changed. For polythene water tank’ sizes you can visit polythene water tank sizes page.

Acid Tank References2019-03-13T14:09:06+03:00

Since 1984, we continued to produce polyester and polyethylene acid tanks, acid tanks are used by many companies over Turkey and the world. You can review some of our references and the products we produce. For more references Our references You can visit our page.
1. Sandoz Syntek
50 ton horizontal chemical waste tank and 26 ton chemical mixer tank are provided for Sandoz.

2. APS Ambalaj
24m3 silo acid tanks and 13 ton mixer tank production were provided.
3. Kale Kimya
50 ton vertical acid tanks and 5m3 prismatic acid tank were produced.
4. Karabacak Madencilik
Production of 13m3 HCL silo acid tank and 20m3 hcl stock tank were provided.
5. İlve Kimya
56/5000 Production of 20 ton silo phosphoric acid tank was provided.
6. Kolin İnşaat
Production of 20 ton HCL acid tank was provided.
7. EURO Kimya
25m3 Silo Caustic tank production is provided.
8. Doktor Tarsa
6 ton vertical phosphoric acid tank production was provided.
Production of 20 ton poly aluminum chloride tank is provided.
Acid Tank Considerations2019-03-13T13:11:39+03:00

The most important thing to know about the acid tank is the acid concentration ratio and the stock temperature. Polythene acid tanks resist to all acid concentrate ratios. Stock temperature must not exceed 55 degrees Celsius, for all acid types.
For polyester acid tanks, the acid type, concentration ratio and stock temperature value are very important. Because resin resist to different acid types in different concentration ratios and temperature values . As the concentration ratio decreases, the stock temperature resistance increases. In addition, thermal protection can be provided with isocam application for polyester acid tanks.
Never use the products for any other acid than the specified acid type and values during the order.
All acid tanks should be tested primarily with water before filling acid. Water testing is recommended against problems during shipment.
All product groups must be placed on a flat concrete ground.
Polyester epoxy resin strength table to display click.

What is Caustic Acid?

Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na+ and hydroxide anions OH−.
Sodium hydroxide is a highly caustic base and alkali that decomposes proteins at ordinary ambient temperatures and may cause severe chemical burns. It is highly soluble in water, and readily absorbs moisture and carbon dioxide from the air. It forms a series of hydrates NaOH·nH2O. The monohydrate NaOH·H 2Ocrystallizes from water solutions between 12.3 and 61.8 °C. The commercially available “sodium hydroxide” is often this monohydrate, and published data may refer to it instead of the anhydrous compound. As one of the simplest hydroxides, it is frequently utilized alongside neutral water and acidic hydrochloric acid to demonstrate the pH scale to chemistry students.
Sodium hydroxide is used in many industries: in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents, and as a drain cleaner. Worldwide production in 2004 was approximately 60 million tonnes, while demand was 51 million tonnes.

Chemical Name Sodium Hydroxide
Formula NaOH
Molecular Weight 39.9971 g/mol
Colour / Form White, Liquid
Density 2.1 g/cm³
Melting Point 318 ° C
Boiling Point 1.390 °C