Polythene underground water tanks are produced for underground use. Polythene underground water tanks produced in horizontal position and can only be produced in 3 ton and 5 ton capacity. Belted structure increase tank strength.

You can visit our polyester underground water tanks page for different tonnage underground water tank products.

Polyester Underground Water Tanks

Polythene Underground Water Tanks Features

  • Thicker than standard water tanks.
  • Belted structure increase tank resistance against to sand pressure that will be covered.
  • Production is provided accordingly 50 cm elevation level.
  • There are 2 pieces manway and 1 piece vent pipe on tank.
  • Dimensions are standard.
  • Production can be provided just within 3 ton and 5 ton capacity.
  • Tanks are produced accordingly hydrophore pump use.
  • Our products comply with food regulations.
5 Ton Polythene Underground Water Tank

5 Ton Polythene Underground Water Tank

Details of Polythene Underground Water Tanks

Polythene underground water tank products that we produce in 5 tons and 3 tons capacity are under 2 years warranty against production defects.

5 Ton Polythene Underground Water Tank

You can view the product dimensions and equipment list in the page. You can visit product page for more detailed information.

Page
Dimensions
Sizes
Width 160 cm
Height 210 cm
Length 292 cm
Cover 45 cm
Vent Pipe 32 mm
Inlet Rakor 1″
Outlet Rakor 1″
Equipment Details
Equipments
Lifting Lug 2 pieces
Manway 2 pcs.
Inlet Rakor 1 pcs.
Outlet Rakor 1 pcs.
Vent Pipe 1 pcs.
Tank dimensions, equipment dimensions, position and quantities of equipment can not be changed.

3 Ton Polythene Underground Water Tank

You can view the product dimensions and equipment list in the page. You can visit product page for more detailed information.

Page
Dimensions
Sizes
Width 160 cm
Height 210 cm
Length 184 cm
Cover 45 cm
Vent Pipe 32 mm
Inlet Rakor 1″
Outlet Rakor 1″
Equipment Details
Equipments
Lifting Lug 2 pieces
Manway 2 pcs.
Inlet Rakor 1 pcs.
Outlet Rakor 1 pcs.
Vent Pipe 1 pcs.
Tank dimensions, equipment dimensions, position and quantities of equipment can not be changed.

Use Terms of Polythene Underground Water Tanks

  • Use the products in accordance with the instructions of use sent to you.
  • Excavation dimensions are clearly indicated.
  • Never exceed the specified dimensions.
  • Excavation soil should not be used when burying the products.
  • Use thin sand during burying of tank.
  • In areas with a elevation difference above 50 cm, we must be informed.
  • In areas with heavy rainfall, your tank may rise above the excavation area. In these areas, it will be appropriate to pour concrete on the top of the excavation area.
  • Do not use in areas with vehicle traffic.