Polythene septic tanks are strengthened against to use under ground. Polythene septic tanks produced in horizontal position and can only be produced in 3 ton and 5 ton capacity. Belted structure increase tank strength.

You can visit our polyester septic tanks page for different capacity septic tank products.

Polyester Septic Tanks

Polythene Septic Tank Features

  • Thicker than standard water tanks.
  • Belted structure increase tank resistance against to sand pressure that will be covered.
  • Production is provided accordingly 50 cm elevation level.
  • There are a manhole cover and a vent pipe on tank.
  • Dimensions are standard.
  • Production can be provided just within 3 ton and 5 ton capacity.
Polythene Septic Tanks

Polythene Septic Tanks

Polythene Septic Tanks Details

Polythene septic tanks, which can be produced within 3 ton and 5 ton capacity, have 2 years warranty against to production defects.

5 Ton Polythene Septic Tank

You can view the product dimensions and equipment list in the page. You can visit product page for more detailed information.

Page
Dimensions
Sizes
Width 160 cm
Height 210 cm
Length 292 cm
Cover 45 cm
Vent Pipe 32 mm
Inlet Pipe dn100
Equipment Details
Equipments
Lifting Lug 2 pieces
Manhole 1 pcs.
Inlet Pipe 1 pcs.
Vent Pipe 1 pcs.
Tank dimensions, equipment dimensions, position and quantities of equipment can not be changed.

3 Ton Polythene Septic Tank

You can view the product dimensions and equipment list in the page. You can visit product page for more detailed information.

Page
Dimensions
Sizes
Width 160 cm
Height 210 cm
Length 184 cm
Cover 45 cm
Vent Pipe 32 mm
Inlet Pipe dn100
Equipment Details
Equipments
Lifting Lug 2 pieces
Manhole 1 pcs.
Inlet Pipe 1 pcs.
Vent Pipe 1 pcs.
Tank dimensions, equipment dimensions, position and quantities of equipment can not be changed.

Use Terms of Polythene Septic Tanks

  • Use the products in accordance with the instructions of use sent to you.
  • Excavation dimensions are clearly indicated.
  • Never exceed the specified dimensions.
  • Excavation soil should not be used when burying the products.
  • Use thin sand during burying of tank.
  • In areas with a elevation difference above 50 cm, we must be informed.
  • In areas with heavy rainfall, your tank may rise above the excavation area. In these areas, it will be appropriate to pour concrete on the top of the excavation area.
  • Do not use in areas with vehicle traffic.