Polyethylene acid tanks are produced by thickening the polyethylene water tanks in the ratio of the concentrate value to be stored for the purpose of stocking acids at certain concentrations and temperatures. Polyethylene acid tanks may be used at a maximum temperature of 60 degrees. Polyethylene acid tanks cannot be used for higher acid storage.
Polyethylene raw material is a kind of thermoplastic with high chemical resistance. Therefore, it can provide strength for almost all acid types. Especially for acid types such as caustic acid, hydrochloric acid, iron chloride, it is very much used. For more dangerous acid species, such as sulfuric acid and nitric acid, a service life of 8 to 10 years is predicted by volume.

Polyethylene Acid Tanks

Horizontal Polyethylene Acid Tanks

Horizontal polyethylene acid tanks may be used in areas where height is not sufficient, although not much preferred. Polyethylene tanks produced by thickening according to the concentration of acid type to be stored are generally used for hypo, hcl, solution and caustic acid types.
Outlet connection equipments vary according to product volume and demand. Outlet connection equipments are made of PE material and do not interact with acid.
For more information, you can visit our contact page or you can call us on your mobile devices.

Horizontal Tank Dimensions

Hacim Genişlik Yükseklik Uzunluk
1m3 92 cm 103 cm 152 cm
1.5m3 102 cm 115 cm 190 cm
2m3 110 cm 124 cm 210 cm
3m3 133 cm 150 cm 230 cm
5m3 173 cm 185 cm 250 cm
Hacim Çıkış Kapak
1m3 1″ 40 cm
1.5m3 1″ 40 cm
2m3 1″ 40 cm
3m3 1″ 40 cm
5m3 2″ 40 cm
All tanks are thickened according to the concentration of acid type to be used.

Dikey Polietilen Asit Tankları

Polietilen asit tankı üretimleri genel olarak dikey olarak sağlanmaktadır. Bağlantıların daha kolay yapılabilmesi ve akış hızının yatay depolara göre daha fazla olması kullanımını arttırmaktadır. Ayrıca yatay depo üretiminin 5 ton hacme kadar sınırlı olması, dikey depo kullanımını arttırmaktadır.

Dikey Polietilen Asit Tankı Ölçüleri

Capacity Width Height
1m3 106 cm 130 cm
1.5m3 115 cm 160 cm
2m3 134 cm 173 cm
3m3 145 cm 210 cm
4m3 180 cm 185 cm
5m3 200 cm 195 cm
7m3 200 cm 250 cm
8m3 235 cm 215 cm
10m3 235 cm 263 cm
15m3 282 cm 282 cm
20m3 282 cm 343 cm
25m3 300 cm 400 cm
Capacity Outlet Manway
1m3 1″ 40 cm
1.5m3 1″ 40 cm
2m3 1″ 40 cm
3m3 1″ 40 cm
4m3 1″ 40 cm
5m3 2″ 40 cm
7m3 2″ 40 cm
8m3 2″ 40 cm
10m3 2″ 40 cm
15m3 2″ 40 cm
20m3 2″ 40 cm
25m3 2″ 40 cm
All tanks are thickened according to the concentration of acid type to be used.

Other Types of Polyethylene Acid Tank

Polyethylene acid tanks are manufactured as silo tank, brine silo tank and brine tank.

Silo tanks are generally used for liquid packaging processes and machine systems, the bottom of which is conically produced. The most important advantage of these products is that the fluidity is fast and there are no products left in them. 25% thicker than standard tanks.

Volume Width Height Height with Leg
500Lt. 80 cm 135 cm 185 cm
1m3 106 cm 182 cm 235 cm
2m3 134 cm 192 cm 255 cm
3m3 146 cm 265 cm 310 cm
4m3 192 cm 215 cm 270 cm
5m3 192 cm 240 cm 295 cm
10m3 235 cm 300 cm 350 cm
22m3 282 cm 410 cm 467 cm
Volume Outlet Cover
500Lt. 1″ 40 cm
1m3 1″ 40 cm
2m3 1″ 40 cm
3m3 1″ 40 cm
4m3 2″ 40 cm
5m3 2″ 40 cm
10m3 2″ 40 cm
22m3 2″ 40 cm

Polyethylene silo brine tanks are produced with the upper part completely open. It is mostly preferred for the use of mixer tank. 25% thicker than standard products.

Volume Width Height Height with Metal Leg
1m3 106 cm 170 cm 235 cm
2m3 134 cm 170 cm 235 cm
3m3 146 cm 213 cm 270 cm
4m3 192 cm 200 cm 250 cm
5m3 192 cm 230 cm 270 cm
Volume Outlet
1m3 1″
2m3 1″
3m3 1″
4m3 2″
5m3 2″

Tanks upper part is open and bottom part is flat.

Volume Width Upper Width Height
500Lt. 80 cm 86 cm 110 cm
1m3 106 cm 112 cm 117 cm
2m3 134 cm 140 cm 150 cm
3m3 146 cm 157 cm 180 cm
4m3 192 cm 200 cm 150 cm
5m3 192 cm 200 cm 170 cm
Volume Outlet
500Lt. 1″
1m3 1″
2m3 1″
3m3 1″
4m3 2″
5m3 2″