Underground Water Tanks FAQ

/Underground Water Tanks FAQ

How should a underground tank’ closure be done?

By |2019-03-25T15:39:08+03:00March 25th, 2019|Categories: , |

The closure process should be done by filling the remaining spaces after tank puts to excavation area. In addition, this process should not be provided on one side. Filling should be done at equal distances and amount from four sides. When sand is unloaded from one side, your tank may slide towards the other side and [...]

Can the deep embedding be done?

By |2019-03-25T14:55:55+03:00March 25th, 2019|Categories: , |

Deeper embedding operations are called elevation differences. This indicates how much the tank tank will be below the upper ground level. Our products are produced according to the elevation difference of 30 cm as standard. The elevation difference can be increased according to your request. We will need to be informed about this process. Accordingly, the [...]

What is the Dividing Wall Function?

By |2019-03-16T13:14:15+03:00March 16th, 2019|Categories: , |

Dividing wall is the a fiberglass equipment that has sections at specific dimensions and places to inside of tank according at various quantities to tank volume. The dividing walls functionally minimize the soil pressure on the tank. It also reduces the flexibility of the tank and increases the product strength. The number of dividing wall is [...]

Placement of Underground Water Tanks

By |2019-03-16T11:57:47+03:00March 16th, 2019|Categories: , |

During the placement of underground water tanks, lifters should be used. Any equipment should be not used except lifters. In addition, a work machine or crane must be used during the placement of underground tanks. During placement without construction equipment or cranes, may be occurred damage to your tank For products with a volume over 40 [...]

How should the placement of the water tank be in excavation area?

By |2019-03-14T16:49:57+03:00March 14th, 2019|Categories: , |

Water tank placement should be made in the middle of excavation area. The distance of the tank to all sides should be set at equal distance. It is also recommended to check that the tank's bottom side contact with the concrete ground. Cylindrical underground water tanks distribute pressure. However, as mentioned above, if all the edge [...]

Does the water smell?

By |2019-03-14T16:23:12+03:00March 14th, 2019|Categories: |

Ventilation equipment is provided on the tank so that your water does not smell. This equipment will prevent the smelling of water after your tank is placed under the ground. In addition, products will not be exposed to sunlight under the ground will not be algae, so your water will remain clean.