50 ton underground water tank has 2 different production types, which are generally hydrophore use and submersible pump use. You can review the technical details and price information in our page.

Equipments for Submersible Pump Use

50 Ton Underground Water Tank

Equipment List of Hydrophore Pump Use

50 Ton Underground Water Storage Tank

Please indicate to your sales representative the requested usage type before the order.

50 Ton Underground Water Tank

Underground water tanks are generally preferred to save space and to protect water from weather conditions. The tank’s chamber is 30 cm below the top of ground as standard. This level height can be changed according to request. For tank with elevation level is above 30 cm, prices may vary.

50 Ton Underground Water Tank Price

Product Price

943000$Quantity
  • VAT is not included.
  • Free shipping charge for Istanbul.

Submersible Pump Use for 50 Ton Underground Water Tank

For the products to be used in submersible pumps, the pump placement is made inside the tank. There is a special plate in the tank for the settlement. For the pump connection, a adaptor is connected, in the required size, to the inner and outer part of the tank’s top side at the center of the plate. In addition, there is a manway on the tank as an intervention cover, also there are a ventilation pipe and lifting lugs. Filling pipes are available for collection of rain water on demand.

Equipment Array

Equipment List

  1. Manway
  2. Inlet Adaptor
  3. Pump Adaptor
  4. Pump Manhole
  5. Vent Pipe
  6. Dividing Wall
  7. Lifting Lugs
  8. Pump Plate
  9. U-Profile Support
  10. Anchorage

Equipment array and dimensions can be arranged according to your request. Please contact us for extra equipment request and changes.

INSTRUCTIONS
Tanks can be manufactured with different dimensions. Especially, for shipping of tanks with standart trucks or container, you can view these instructions at below.

Sizes for Standart Truck

INSTRUCTIONS

Sizes for Container

INSTRUCTIONS

Hydrophore Use

There is an output adaptor at the bottom for the underground water tanks to be connected to hydrophore pump. The use of the water in the tank is made from the bottom. The use of hydrophore pump is not preferred for underground water tanks. As a standard, the tank cover, ventilation pipe and lifting lugs are assembled to tank. Also, according to the demand, a filling pipe can be placed to accumulate rainwater.

Equipment Array

Equipment List

  1. Manway
  2. Inlet Adaptor
  3. Pump Adaptor
  4. Vent Pipe
  5. Lifting Lugs
  6. Dividing Wall
  7. U-Profile Support
  8. Anchorage

Equipment array and dimensions can be arranged according to your request. Please contact us for extra equipment request and changes.

INSTRUCTIONS
Tanks can be manufactured with different dimensions. Especially, for shipping of tanks with standart trucks or container, you can view these instructions at below.

Sizes for Standart Truck

INSTRUCTIONS

Sizes for Container

INSTRUCTIONS

Tank Dimensions

Size 1

Width 310 cm
Height 350 cm
Length 660 cm
Elevation Level/b> 30 cm

Size 2

Width 300 cm
Height 340 cm
Length 720 cm
Elevation Level 30 cm
In accordance with your request, the same size production can be provided for both types of use.

Tank Images

Use Terms of 50 Ton Underground Water Tank

  1. Please prepare the excavation area of your products according to the dimensions specified in the instructions.
  2. Please indicate your usage type (submerge pump or hydrophore) before order.
  3. The base of the excavation area must be a flat concrete ground.
  4. Remove the excavation soil from area after excavating.
  5. Over of tank must be covered with fine sand.
  6. Place your tank at the excavation area with equal distance from all sides.
  7. When placing the tank, always use the lifting lugs.
  8. Make sure to be water in the tank, especially in areas where excess precipitation is observed.
You can contact with our sales representatives for any questions and requests. Contact