5 ton underground water tank has 2 different production types, which are generally hydrophore use and submersible pump use. You can review the technical details and price information in our page.

5 Ton Underground Water Tank

Hydrophore Pump

5 Ton Underground Water Tank

Submersible Pump

Please indicate to your sales representative the requested usage type before the order.

5 Ton Underground Water Tank

Underground water tanks are generally preferred to save space and to protect water from weather conditions. The tank’s chamber is 30 cm below the top of ground as standard. This level height can be changed according to request. For tank with elevation level is above 30 cm, prices may vary.

5 Ton Underground Water Tank Price

Product Price

94000$Quantity
  • VAT is not included.
  • Free shipping charge for Istanbul.

Submersible Pump

For the products to be used in submersible pumps, the pump placement is made inside the tank. There is a special plate in the tank for the settlement. For the pump connection, a adaptor is connected, in the required size, to the inner and outer part of the tank’s top side at the center of the plate. In addition, there is a manway on the tank as an intervention cover, also there are a ventilation pipe and lifting lugs. Filling pipes are available for collection of rain water on demand.

Equipment Array

Equipment List

  1. Manway
  2. Inlet Adaptor
  3. Pump Adaptor
  4. Pump Plate
  5. Vent Pipe
  6. Lifting Lugs
  7. Dividing Wall
  8. Rain water collection pipe

Equipment array and dimensions can be arranged according to your request. Please contact us for extra equipment request and changes.

Hydrophore Pump Use

There is an output adaptor at the bottom for the underground water tanks to be connected to hydrophore pump. The use of the water in the tank is made from the bottom. The use of hydrophore pump is not preferred for underground water tanks. As a standard, the tank cover, ventilation pipe and lifting lugs are assembled to tank. Also, according to the demand, a filling pipe can be placed to accumulate rainwater.

Equipment Array

Equipment List

  1. Manway
  2. Inlet Adaptor
  3. Pump Adaptor
  4. Vent Pipe
  5. Lifting Lugs
  6. Dividing Wall
  7. Rain water pipe

Equipment array and dimensions can be arranged according to your request. Please contact us for extra equipment request and changes.

Tank Dimensions

Size 1

Width 140 cm
Height 175 cm
Length 215 cm
Elevation Level 30 cm

Size 2

Width 180 cm
Height 220 cm
Length 200 cm
Elevation Level 30 cm
In accordance with your request, the same size production can be provided for both types of use.

Product Images

Use Terms

  1. Please prepare the excavation area of your products according to the dimensions specified in the instructions.
  2. Please indicate your usage type (submerge pump or hydrophore) before order.
  3. The base of the excavation area must be a flat concrete ground.
  4. Remove the excavation soil from area after excavating.
  5. Over of tank must be covered with fine sand.
  6. Place your tank at the excavation area with equal distance from all sides.
  7. When placing the tank, always use the lifting lugs.
  8. Make sure to be water in the tank, especially in areas where excess precipitation is observed.
You can contact with our sales representatives for any questions and requests. Contact