The production of 100 ton fiberglass water tank consists of a compositing of fiberglass and polyester resin. Fiberglass water tanks are products with the highest warranty period with 5-years. One of the most important advantages is providing as horizontal, vertical and prismatic production in alternative dimensions.
100 Ton Fiberglass Water Tank
|Width||310 cm||350 cm|
|Height||330 cm||1050 cm|
|Cover||70 cm||70 cm|
- The largest volume of fiberglass water tanks production.
- There is no alternative production in terms of shipment security.
- Shipment of vertical water tank is provided by means of road permit. It can affect product costs.
- Tanks have support iron rings on it.
- There are special equipments inside of tank.
- Loading and unloading shall be done by crane only.
- The base of the area where the fiberglass water tank will be used must be a flat concrete floor. Make sure that there is no material on the floor.
- For horizontal water tanks, the legs of tanks and for vertical tanks the bottom side of the tanks should be completely in contact with the concrete ground.
- The fiberglass water tank must never be lifted or moved from the inlet and outlet connections.
- Do not lift or move when it is full.
- Do not interfere with penetrating or sharp objects.
- You can make your tank healthier use by doing internal cleaning in half term.
The placement of horizontal or vertical tanks must be exactly as shown in the pictures. Otherwise the products will not be covered by the warranty.