1 ton water tank production can be produced as polyester or polyethylene. You can compare prices and product details for 2 different product types.

1 Ton Water Tank

Related Pages

1 Ton Water Tank Images

Polyester Water Tank

Polythene Water Tank

1 Ton Water Tank Prices

Prices
Polyester Water Tank $285,00
Polythene Blue Vertical Water Tank $160,00
Polythene Blue Horizontal Water Tank $160,00
Polythene White Vertical Water Tank $145,00
Polythene White Horizontal Water Tank $145,00
The prices are valid for the following measurements. The prices may vary for the sizes not included in the table.

Sizes

Polyester water tank sizes can be produced in different alternatives. In addition, prismatic production is possible in all desired sizes. Polyethylene water tank dimensions are standard and cannot be changed.

1 Ton Polyester Water Tank Sizes

Horizontal Size 1 Size 2
Width 100 cm 80 cm
Height 85 cm 100 cm
Length 150 cm 200 cm
Cover 35 cm
Inlet 1″ (25 mm)
Vertical Size 1 Size 2
Width 100 cm 80 cm
Height 140 cm 210 cm
Cover 35 cm
Outlet 1″ (25 mm)

1 Ton Polythene Water Tank Sizes

Horizontal Size 1
Width 92 cm
Height 103 cm
Length 153 cm
Cover 40 cm
Outlet 3/4″ (20 mm)
Vertical Size 1 Size 2 Size 3
Width 78 cm 88 cm 106 cm
Height 220 cm 188 cm 130 cm
Cover 40 cm
Outlet 3/4″ (20 mm)

Delivery Process

  • Polythene water tanks  stocks are ready in certain quantities. Delivery will be done in the fastest way according to the availability of the vehicle after the order.
  • Polyester water tanks are manufactured upon to order. Production time for 1 ton water tank is 2 working days. After the production is completed, your product will be delivered as soon as possible.

Warranty Periods

1 ton polyethylene water tank warranty period is 2 years, 1 ton polyester water tank warranty period is 5 years. In order to ensure that your products are covered by the warranty, please comply with the installation instructions specified in the warranty conditions.

Warranty Terms

  • Water tank products must be placed on a flat concrete floor. Make sure that for horizontal tanks, legs of tank and for vertical tanks the bottom side of tank should be contacted completely with the floor.
  • Do not use for out of water. For usage except of water you must inform us before order.
  • Use flexible pipe when making connection of the products. Support the bottom side of the output valve by putting a support material under side of it.
  • Do not interfere with cutting or sharp objects on the products.
  • Do not lift or move when it is full.
  • Do not move products using the outlet valve or cap equipment of tank..
  • By cleaning of products every 6 months, you can provide more hygienic usage..

About Polyester Water Tanks

  • Polyester water tanks can be repaired and provide the required strength after repair.
  • Polyester water tanks that are manufactured with food resin, have certificate of conformity to food regulations. View Certificate.
  • Polyester water tanks offer multiple measure alternatives. You can get information from our sales representatives for many alternative sizes as cylindrical or prismatic.  You can use Mobile Call or Contact links to contact with us.
  • It is one of the most important advantages to provide production in desired size and volume.
  • Enables maximum volume in minimum dimensions.
  • Polyester gel-coat provides maximum protection against to sun’s rays and to be moss.

About Polythene Water Tanks

  • Our products are produced from high density polyethylene raw material..
  • Suitable to food regulations.
  • Dimensions and product volumes are standard.
  • For non-water use, you must obtain information.
  • Tanks’ cap position and size cannot be changed.
  • Outlet valve size and position on tank can be changed on request.